[TRNSYS-users] Type 93

[Mohamed]

Thanks a lot David 
But I would like to connect the results with some other equations for further calculations 
So how can I do that?

Sent from my iPhone

> On Oct 5, 2017, at 11:07 AM, David BRADLEY <d.bradley at tess-inc.com> wrote:
> 
> Mohamed,
> 
>   Set the Type24 to integrate (and reset) over a 24 hour period then use a Type25 to print results to a file once every 24 hours. Or you can use Type46, which does both the integrating and printing in the same component.
> 
> kind regards,
> 
>  David
> 
> 
> 
>> On 10/05/2017 10:00, Mohamed Kaheal via TRNSYS-users wrote:
>> Hello All,
>> I am using quantity integrator (type 24) to sum a useful energy from a solar collector, where I would like to sum the input every 24 hours for a whole year. then I need to use the values after the summation which are the values at 24, 48, 72, ... etc. I am thinking to use type 93 for that but I do not know how. So, is there any way that helps me storing the values and then recalling them again. any help will be appreciated.
>> 
>> 
>> Thanks for all of you
>> Mohamed
>>  
>> 
>> 	Virus-free. www.avg.com
>> 
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> 
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
> 
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
> 
> http://www.tess-inc.com
> http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171006/bb4ef9a2/attachment.htm>