[TRNSYS-users] trnsys3d for 17 and 18

[David BRADLEY]

Adnan,

   If I understand the problem the same *.idf file can be imported into 
Trnsys18's TRNBuild but not into Trnsys17's TRNBuild? To my knowledge, 
the Trnsys3d plugin should work for either Trnsys version. Someone 
please correct me if I am wrong about that!

   I would suggest that you send the *.idf file to your distributor and 
see if they can give you some assistance.

kind regards,

  David



On 10/29/2017 21:05, adnan rasheed via TRNSYS-users wrote:
> Hello all,
>
> i have both TRNSYS 17 and 18 installed in my computer. but right now i 
> am working on TRNSYS 17. my problem is after installing TRNSYS 18 my 
> google sketchup's plugin Trans3d is not working for TRNSYS 17 but 
> workiing perfect with TRNSYS 18. i think file is updated. for now i 
> need to use TRNSYS 17. how can i solve this problem. when i import idf 
> file in 17 it shows empty file but when i import into 18 it works well.
>
>
> Regards
>
> Adnan rasheed.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171031/bcd199df/attachment-0001.html>