[TRNSYS-users] Range check error

[David BRADLEY]

Benjamin,

  A range check error is a generic fortran error that needs to be 
tracked down with the debugger. If you are using Trnsys17 or 18 and are 
using only standard components, TESSLib components and/or Transsolar non 
standard components then you should contact your distributor for assistance.

  I have gotten the "cannot find dfdev.exe" error in the past. I seem to 
recall that restarting the compiler (or reinstalling the compiler) fixed it.

kind regards,

  David



On 11/28/2017 06:30, Manrique Delgado Benjamin via TRNSYS-users wrote:
>
> Dear all,
>
> I’m facing a ”Range check error” message followed by “An unexpected 
> error was encountered and TRNSYS will abort.”
>
> The Debug mode doesn’t show any information that might help to trace 
> the error in the List file, and I can’t manage to run the Fortran 
> debugger (MVS 2010) since TRNSYS searches for Dfdev.exe, but I cannot 
> find it anywhere in the MVS directory.
>
> Do you have any advice on how to find the error, or how to run the 
> debugger?
>
> Kind regards,
>
> Benjamin Manrique D.
>
> Aalto University
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171128/faf5e4c7/attachment.htm>