[TRNSYS-users] Initial value for outputs

Jeff Thornton thornton at tess-inc.com
Tue Nov 14 10:54:02 PST 2017


 

Ghady, 

You wrote "In order to add the initial value outputs in the Type 164
code, I prefer to create a new type and not modify the existed one in
Trnsys Library. For that I created a new component using Trnsys 17. I
had some difficulties because it's not the same code writing from
defining inputs, outputs and parameters to storage; I managed to copy
the code line that I am interested in but the problem remains with the
storage array.> 

Unless you want to completely re-write a version 16 component in version
17 format (and you are certainly willing to attempt that if you'd like),
I would suggest that you leave it in version 16 format and just change
the output initialization line as I suggested earlier. Find the lines: 

!set initial output values
OUT(1:NO)=0.d0

and replace them with your initial values:
Out(1) =20.d0
Out(2) = 0.do
etc.

Jeff

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 11/13/2017 7:35 am, Ghady Dib via TRNSYS-users wrote: 

> Hello, 
> 
> In order to add the initial value outputs in the Type 164 code, I prefer to create a new type and not modify the existed one in Trnsys Library. 
> 
> For that I created a new component using Trnsys 17. I had some difficulties because it's not the same code writing from defining inputs, outputs and parameters to storage; I managed to copy the code line that I am interested in but the problem remains with the storage array. 
> 
> In fact when I created the new component (from Trnsys), I didn't notice any place where I can specify my number of storage (Which is equal to 2 in Type 164). 
> 
> Do I set my storage number there: ''CALL SETNUMBERSTOREDVARIABLES(0,0)''; It's not like the inputs and parameters where I defined their numbers them in Trnsys. 
> 
> I have to include (in my new component ''type210'') the storage array in FOUR places just like in type 164a: 
> 
> POST CONVERGENCE MANIPULAITIONS 
> 
> CALL getStorageVars(STORED,NS,INFO) 
> 
> STORED(1)=STORED(2) 
> 
> CALL setStorageVars(STORED,NS,INFO) 
> 
> PERFORM FIRST CALL MANIPULATIONS 
> 
> CALL setStorageSize(NS,INFO) 
> 
> PERFORM INITIAL TIMESTEP MANIPULATIONS 
> 
> STORED(1:NS) = N_INI !NO. OF MOLES IN PREVIOUS TIME STEP 
> 
> CALL setStorageVars(STORED,NS,INFO) 
> 
> UPDATE STORAGE 
> 
> STORED(2) = NGAS 
> 
> CALL setStorageVars(STORED,NS,INFO) 
> 
> Are these nomenclatures work in the Type210 created by Trnsys 17? Or I have to include other nomenclatures ? such as getStaticArrayValue ? and for the others ? 
> 
> Thank you in advance for your support. 
> -- 
> 
> Ghady DIB 
> 
> Doctorant
> Laboratoire CETHIL UMR 5008 Groupe Energétique des Systèmes Thermiques et Frigorifiques (ESTF) Département Génie Energétique et Environnement INSA Lyon France 
> 
> Tel:+ (33) 6 33 52 96 74 [2] 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[2] tel:%2B%20%2833%29%206%2033%2052%2096%2074
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171114/5702dd2d/attachment.htm>


More information about the TRNSYS-users mailing list