[TRNSYS-users] TYPE 28

[Khuleed Mehboob]

Thanks. Another issue also as it can be done by yours mentioned procedure but I want to make my aim clear.
I have the cooling load in kJ/h and I want to see that for total simulation period, how much kW power is required? 

    On Thursday, November 9, 2017 10:37 PM, David BRADLEY <d.bradley at tess-inc.com> wrote:
 

  Khuleed,   I would highly recommend that if at all possible you use equations and Type46 (an integrator/printer combination) rather than using Type28. best,  David 
  
 On 11/09/2017 11:24, Khuleed Mehboob via TRNSYS-users wrote:
  
  Hi, I am using type 28 for obtaining sensible load for cooling throughout the simulation. I am a beginner to this type. kindly, guide me the proper way and also, the operation code for TYPE 28. help will be highly appreciated.  
  
 _______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
 
 
 -- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171109/f1c4a105/attachment.htm>