[TRNSYS-users] Dynamic efficiency

Jeff Thornton thornton at tess-inc.com
Tue Nov 7 07:30:55 PST 2017


Sadjad,

Absolutely that's how TRNSYS works.  TRNSYS models take time independent values called PARAMETERS and time-dependent values called INPUTS together to calculate the OUTPUTS from the model.  The inputs can be from another model, set to a constant value, read from an external file, set by a function etc.

We have several "heating unit" models and they differ on how they calculate the performance.  Most read a performance data file that returns a value based on the inlet operating conditions.

Jeff
TESS LLC

Sent from my iPhone

> On Nov 7, 2017, at 3:40 AM, Seyyed Tajdaran via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello all
> 
> I am looking into use TRNSYS for dynamic simulation. However, I am struggling to find out if the software actually works in a dynamic condition. To be specific I would like to know if the efficiency of a heating unit is calculated as a function of the relevant parameters (i.e. time, temperature, pressure)???  
> 
> 
> Warm regards,
> Sadjad
> -- 
> Sadjad Tajdaran
> PhD Candidate | Research Assistant
> 
> Oxford Brookes University, School of Architecture, Faculty of Technology Design and Environment
> Architectural Engineering Group
> JP203, John Payne Building,Headington Campus, Gipsy Lane, Oxford, UK, OX3 0BP
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171107/facec6f6/attachment.htm>


More information about the TRNSYS-users mailing list