[TRNSYS-users] problem with opening .idf file in SketchUp/Trnsys3d

Karol BANDURSKI via TRNSYS-users trnsys-users at lists.onebuilding.org
Fri May 12 05:21:36 PDT 2017


Yes, I use menu of Trnsys3d plug-in. So, it should be something other

 

Karol

 

 

From: hotline [mailto:hotline at Transsolar.com] 
Sent: Friday, May 12, 2017 12:30 PM
To: Karol Bandurski <karol.bandurski at put.poznan.pl>; TRNSYS users mailing
list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Subject: AW: [TRNSYS-users] problem with opening .idf file in
SketchUp/Trnsys3d

 

Dear Karol,

 

make sure to use the "open TRNSYS 3D input file" button to open an .idf
file, not the regular "open" button, which would open a regular sketchup
file.

 

Best
Jakob

 

____________________________________________________________________________
______________________

 

Jakob Merk M.Sc.

 

Transsolar Energietechnik GmbH

Curiestraße 2

70563 Stuttgart

Telefon: +49 711 67976-0
Fax:        +49 711 67976-11
Email:    merk at transsolar.com <mailto:merk at transsolar.com> 
http://www.transsolar.com <http://www.transsolar.com/> 

Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und
Nutzerkomfort in Gebäuden

Stuttgart - München - New York - Paris 

Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas
Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle

Eingetragen beim Amtsgericht Stuttgart HRB 23347, 

Steuernummer: 99073/00911,USt-IdNr.: DE 152272639

 

 

 

Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im
Auftrag von Karol Bandurski via TRNSYS-users
Gesendet: 12 May 2017 11:06
An: trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu> ;
TRNSYS-users at lists.onebuilding.org
<mailto:TRNSYS-users at lists.onebuilding.org> 
Betreff: [TRNSYS-users] problem with opening .idf file in SketchUp/Trnsys3d

 

Dear Users

 

I have exported *.idf file from TRNBuild/. I would like to modify it in
SketchUp. But I cannot open it by Trnsys3d plug-in in SketchUp.

Firstly I click "Open", then I choose the .idf file and "Open", but nothing
happened.

 

Could you write me what could be wrong?

 

Regards,
Karol 

 

--------------------------------------------------------------------

Karol BANDURSKI M. Sc.

Faculty of Civil and Environemntal Engeneering

Division of Heating, Air Conditioning and Air Protection

Poznan University of Technology

https://www.researchgate.net/profile/Karol_Bandurski

 <http://www.put.poznan.pl/~karol.bandurski>
www.put.poznan.pl/~karol.bandurski

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170512/0d33f1fb/attachment-0002.htm>


More information about the TRNSYS-users mailing list