[TRNSYS-users] Help with simulating cogeneration/trigeneration.

Jeff Thornton via TRNSYS-users trnsys-users at lists.onebuilding.org
Sun May 21 06:06:12 PDT 2017


There's an engine model in the TESS Co-Gen Library that lets you set the fraction of energy flows (exhaust, jacket water, engine cooler etc) as a function of operating conditions.

Jeff 

Sent from my iPhone

> On May 21, 2017, at 7:23 AM, Taha Ahmed Siddiqui via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> I have been designing a cogeneration/trigeneration system comprising of a SI reciprocating engine driven by natural gas. I'll be utilizing the exhaust heat into a waste heat recovery boiler to raise saturated steam for process steaming, and the heat of the jacket water to obtain cooling through a hot water absorption chiller.
> 
> I have designed this system.manually with all the calculations. I intend to now replicate the same system on Trnsys to validate my results.
> 
> However, I have been struggling to find the right engine in the library where I could start with the input parameters that relate to both the exhuast and the jacket water. Stuck at this, Im unable to move ahead to the rest of the components because of this. 
> 
> Any sort of lead would be helpful..
> Thanks in advance. 
> 
> Get Outlook for Android
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170521/bb71cb7f/attachment.htm>


More information about the TRNSYS-users mailing list