[TRNSYS-users] "Desiccant wheel convergence error"

[Amirreza Heidary via TRNSYS-users]

Dear all

Running attached simulation file, I'm getting this error:

"the regeneration temperature did not converge".

I have spent much time to solve, But I couldn't. Could anyone help me
please?
the inputs and parameters are typical and can be changed in a reasonable
range, if it helps.
The BUI file is attached to be used in the building component.

Thank you


--------------------------------------------------------------------------------------------------------------------------------------------------

*amirrezaheidary*
*master student of energy systems Engineering*
*Sharif university of technology*
*Tehran-Iran*
*E-mail address*:

heidari at energy.sharif.edu

a <sm_mousavi at pwut.ac.ir>mirrezaheidarysbu at gmail.com

*P* *Save a tree... Please don't print this E-mail unless you really need
to.*








  <https://mailtrack.io/> Sent with Mailtrack
<https://mailtrack.io/install?source=signature&lang=en&referral=amirrezaheidarysbu@gmail.com&idSignature=22>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170330/7374e68d/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project58.tpf
Type: application/octet-stream
Size: 306795 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170330/7374e68d/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Greenhouse model.bui
Type: application/octet-stream
Size: 20560 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170330/7374e68d/attachment-0007.obj>