[TRNSYS-users] Wall Heater /TRNBuild

[Mohamed Krarouch via TRNSYS-users]

Hi everyone,

    The aim of my work is to analyze the energetic performance of Hammam
(Turkish bath) heated by the underfloor heating system. I also use the wall
heater to connect the pipe to the boiler (copper, polyethylene or aluminum
and polyethylene) Which will snake 1 m along the walls to circulate
homogeneously hot water, as the floor heating.
I know how to use the active layer on the ground floor, but I don't know
how to use the wall heater in TRNbuild.....can anyone help me??

Best Regards,
Mohamed

-- 
Krarouch Mohamed
Doctorant en Département Physique
Laboratoire de Mécanique des Fluides et Énergétique
Faculté des sciences Semlalia
Université Cadi Ayyad
Marrakech
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170316/4e57d1ad/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ti1.jpg
Type: image/jpeg
Size: 118210 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170316/4e57d1ad/attachment-0003.jpg>