[TRNSYS-users] temperature level control with active layer

[David BRADLEY via TRNSYS-users]

Francesca,

  Instead of defining a VENTILATION type that has inputs for the mass 
flow rate, air temperature and air humidity in TRNBuild you will define 
an active layer in TRNBuild and you will indicate that the mass flow 
rate and temperature of liquid entering the active layer are inputs to 
Type56.

kind regards,

  David



On 03/28/2017 05:20, francesca lorusso via TRNSYS-users wrote:
>
> Dear all,
> concerning the tutorial "temperature level control from energy rate 
> control.", what does it change, if i have to make control temperature 
> with heating/cooling system and not with ventilation one? I create an 
> active layer as a radiant floor and I want to link my heating system 
> (in simulation studio) with my building (TRNbuilding).
>
> Best regards,
> Francesca
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170328/38751043/attachment-0001.htm>