[TRNSYS-users] water steam properties

[David BRADLEY via TRNSYS-users]

Miguel,

   I am not sure whether you are looking for a Type that will give you 
steam properties or a routine that you can call from a Type that you are 
developing. In any case, both exist. Use Type58 (Physical Phenomena: 
Thermodynamic Properties: Refrigerants and Stem: Type58) to return the 
steam properties based on the value of two properties that define the 
steam state. If you are programming a Type then you can call the 
Steam_Properties() routine following the rules that are specified in the 
07-Programmer'sGuide manual.

kind regards,

  David



On 03/09/2017 10:58, Miguel Angel Reyes via TRNSYS-users wrote:
>
> Hi all,
>
> Is there any function to determine water-steam thermodynamics 
> properties? Would I need them for both subcooled liquid, superheated 
> steam and for any steam quality (0 to 1). In other words for any 
> water/steam state of a Rankine cycle.
>
> Many thanks in advance,
>
> Miguel
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170309/31fa86c5/attachment.htm>