[TRNSYS-users] TRNSYS-users digest

[David BRADLEY via TRNSYS-users]

Jignasha,

   Wh are obtained by integrating W over a period of time. The output of 
a component such as a PV or wind turbine is passed to an integrator 
(such as Type24) or to a printer/integrator (Type46)

kind regards,

  David



On 03/07/2017 04:42, Jignasha Bhutka via TRNSYS-users wrote:
> Dear Sir,
>
> I have question regarding unit defined in component output such as PV 
> module and Windmill. This components gives output in W unit in terms 
> of power, but I need the energy generation data in Wh, how I can get 
> the generation in Wh ?
>
> -- 
>
> _Thanks & Regards,_
>
> *Jignasha Bhutka*
> *Junior Research Fellow*
>
>
> *Gujarat Energy Research & Management Institute | Solar Research Wing*
>
> First Floor | Energy Building | Pandit Deendayal Petroleum University 
> Campus | Raisan Village | Gandhinagar - 382007 | Gujarat | India.
>
> Email: jignasha.b at germi.res.in <mailto:jignasha.b at germi.res.in>
>
> *Website:www.germi.org <http://www.germi.org/> *
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170307/18361b63/attachment.htm>