[TRNSYS-users] Mask Shading on ceiling of buildings (type 68)

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Thu Jun 22 11:09:51 PDT 2017


Arian,

   The obstruction height angles are measured from the horizontal to the 
top of the obstruction. The plane in question (from which the height 
angles are measured) for the roof/ceiling is the horizontal plane. In 
fact, the plane in question is always horizontal, regardless of the 
slope of the facade in which the opening is located.

kind regards,

  David



On 06/22/2017 05:45, Arian Bahrami via TRNSYS-users wrote:
> Dear all,
>
> I want to know if there is a specific solution to consider shading of 
> far objects on ceiling of a  building. I had no problem when it comes 
> to shading on the E, W, N, S walls which seems to define vertical 
> openings for these walls and defining angles. Should I use horizontal 
> opening for ceiling? if so how to define the obstruction angles and 
> azimuth angles in this case (respect to what plane exactly)? It seems 
> difficult to visualize the process.
>
> Best Regards,
>
> Arian Bahrami
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170622/14f6f406/attachment-0003.htm>


More information about the TRNSYS-users mailing list