[TRNSYS-users] TYPE 194 modelling

[David BRADLEY via TRNSYS-users]

Clara,

  I am not sure I understand your question. Are you getting an error 
when you try to run the simulation with Type194? In any case I think the 
right thing to do would be to address your question to your 
distributor's tech support hotline and probably to send them the project 
that is not running. If you aren't sure who to contact, please send me 
an email directly and I can help you out.

kind regards,

  David



On 06/21/2017 10:01, Clara Sautron via TRNSYS-users wrote:
>
> Good afternoon,
>
>
> I am an engineering student and during my internship I need to model 
> one PV system with the TYPE 194. Nonetheless, the model doesn't run 
> with this type, but with the TYPE 94 all is ok. Can you explain me if 
> there are some parameters to input one the system (others than the 
> five parameters and the manufacturer's data). Or maybe the links 
> between the components are specific ?
>
> I hope that you can help me to understand how I can use the TYPE 
> 194 and What types of parameters I need.
>
>
> Thank you,
>
> Clara SAUTRON
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170622/63bfffb8/attachment-0003.htm>