[TRNSYS-users] HELP: 1) Heating through a ventilation system, 2) Mix hot and cold fluid in DHW system

Fredrik Bjønness via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Jun 20 04:06:21 PDT 2017


Hello,

I have two questions regarding TRNSYS:

1) I'm building a model where the goal is to simulate a ventilation 
system which is heating a single-zone building. The source-side is a 
vertical ground heat exchanger (Type 557a), and the heat pump is a 
water-water single-stage heat pump (type 927). Any suggestions for 
components that will supply a single-zone building with ventilation heat 
from my heat pump?

2) Another model I've built is a DHW model. I'm using a stratified 
storage tank (type4c), where the setpoint temperature is 50 celsius. The 
next step is to mix this hot water with cold water (approx. 8 celsius) 
such that the "shower-water" is around 40 celsius. Any ideas what 
component that might be used to mix hot and cold water?

Any suggestions would be greatly appreciated.

Best regards,
Fredrik Bjoenness



More information about the TRNSYS-users mailing list