[TRNSYS-users] Modeling Trombe wall type with an Aluminium frame glazing

[Arian Bahrami via TRNSYS-users]

Dear All,
It seems that in type 36 for Trombe Wall, the dimensions of the wall and its glazing are the same. I wonder if there is a specific solution to model a Trombe Wall having a smaller glazing area due to its Aluminium frame around its glazing window (suppose the area of glazing will be less than the Trombe wall area) as shown in the attached Fig.1? 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170618/2e754076/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1453.JPG
Type: image/jpeg
Size: 2096759 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170618/2e754076/attachment-0001.jpe>