[TRNSYS-users] active layer wall type

[David BRADLEY via TRNSYS-users]

Francesca,

  I have used the active layer in Type56 to model both radiant floors 
that both heat and cool. I have not used it to model radiant walls or 
ceilings. I would recommend that you read the relevant sections in the 
05-MultizoneBuilding manual. There are some restrictions placed on tube 
spacing and layer thickness in the active layer model that may be 
relevant to what you are trying to model.

kind regards,

  David



On 06/05/2017 09:42, francesca lorusso via TRNSYS-users wrote:
> Hi,
> I wonder if the wall type "active layer" can model a radiant wall and 
> a radiant ceiling. I know that there is also the wall type " chilled 
> ceiling", but I just used the prevoius type and it is easier for me.
>
> Thank you.
>
> Best regards
>
> -- 
> /_*FRANCESCA LORUSSO*_/
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170605/dae13ba4/attachment-0001.htm>