[TRNSYS-users] TRNSYS-sketchup

Mon Jun 5 07:32:17 PDT 2017

Alvaro,

  If the Trnsys3D tools are not showing up in SketchUp then you may not 
have the correct version of the Trnsys3D installer. Please contact your 
distributor in order to obtain access to the installer. If you are not 
sure who to contact please send me a direct email (i.e. not to the 
entire list) containing your userXX.id information (where XX is your 
TRNSYS version number). The userXX.id can be opened with a text editor. 
I can put you in touch with the right hotline.

kind regards,

  David

On 05/31/2017 22:02, alvaro guillermo valenzuela via TRNSYS-users wrote:
> Hi  im tring to use TRNSYS17 in -sketchup 2017 but that dont work, the 
> program dont recongnite the complemet why i can do ? Thank you very 
> much for your cooperation in advance
>
> -- 
> *Alvaro Valenzuela Escalona*
> Estudiante Ingeniería civil Mecánica
> Universidad Técnica Federico Santa María
> +56-989221038
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170605/bb393b1c/attachment.htm>