[TRNSYS-users] Save and re-use control cards quickly

[David BRADLEY via TRNSYS-users]

Vincent,

  There is not a way to save more than one set but it is an interesting 
idea!

best,

  David



On 06/28/2017 07:14, Vincent Höfte via TRNSYS-users wrote:
> Hi all,
>
> I am relatively new to TRNSYS and maybe this is an obvious question, 
> but I couldn't find the answer in the documentation.
>
> Is it possible to save different pre-sets of Control Cards? I will 
> have to do a lot of simulations with different durations and time 
> steps, but I wish not to manually change all the input of the control 
> cards every time I do a simulation with, for example, a different .BUI 
> file.
>
> For example; I would like to have simulations for four seasonal 
> representative weeks of the year (21-st-28th of March, Jun, Sep, Dec) 
> with a time step of 0,5 hour, and also half a year with a time step of 
> one hour. I want to save the control cards, so I don't have to change 
> the simulation start and step hours, the time step and the tolerances 
> all the time.
>
> I hope my question is clear and that you can help me. Thanks in advance,
>
> Regards,
>
> Vincent Höfte
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170703/4b53b5aa/attachment-0003.htm>