[TRNSYS-users] Trnsys 16 +EES

[David BRADLEY via TRNSYS-users]

Daniela,

  It was reported in Trnsys16 that in some more complicated EES/TRNSYS 
simulations that a simulation could run out of virtual memory. Try 
rebooting the computer and launching just the simulation (maybe directly 
from TRNExe and the *.dck file instead of from the Studio) to see if the 
simulation progresses any further before quitting.

  Also look at the *.lst file and see if an error message is being 
written there.

kind regards,

  David



On 01/31/2017 05:23, Daniela Carina Vásconez Núñez via TRNSYS-users wrote:
>
> Hello,
>
> I'm simulating Trnsys 16 + EES. Trnsys recives calculated values from 
> EES every instant, but, there's a moment that Trnsys does not work, 
> even though EES follows the calculation. I cannot see any errors in 
> Trnsys, for this reason I don’t know how I can solve this issue.
>
> Thanks for your time
>
> Daniela
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170131/1903bcbe/attachment-0003.htm>