[TRNSYS-users] Type 534 run-time error forrtl: severe (193)

[Jobard, Xavier via TRNSYS-users]

Dear TRNSYS users,



I am having problems with Type 534 with plug in. The plug in seems to work correctly. It however outputs an message when closed: "Problem reading cycle number iteration".

Second problem, The application TRNEXE is ended with the error message shown in the Figure enclosed.

In the list file 3 errors are listed:


Error

0

20

534

Message               : The storage tank model was unable to read the parameter values from the supplied data file.  Please check the location and format of this data file carefully.

Error

0

0

534

TRNSYS Message    105 : A TYPE was called in the TRNSYS input file but was either not linked into trndll.dll or was not found in an external dll. A dummy subroutine was called in its place. Please link the TYPE or remove it from the input file  Reported information  : Reported by LinkCk

Error

0

6

2

TRNSYS Message    134 : The current Unit has tried to access a Output value higher than the number of outputs for the Type.  Reported information  : Not available



I believe the last two are a consequence of the first one. The file containing the parameter for type 534 is correctly located and I believe that its format is also correct.



Can somebody help? if needed I can send the deck and list file.



Best regards

Xavier Jobard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170124/b4543698/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CatturaErrore.png
Type: image/png
Size: 20947 bytes
Desc: CatturaErrore.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170124/b4543698/attachment-0003.png>