[TRNSYS-users] TRNSYS. Exchange of air between the Zones of a building

[hotline via TRNSYS-users]

Dear Ilyas,

in TRNSYS17, you can couple air nodes of the same zone via the function coupling in TRNBuild. In TRNSYS18, this will also be possible for zones.
To couple zones in TRNSYS17, you can use the ventilation type manager by defining incoming air flows using the temperatures of the coupled zones.
Please note, that you must only define incoming, positive flows, no negative outgoing flows of a zone.

Best
Jakob

_________________________________________________________________________________________________

Jakob Merk
TRNSYS Software Team

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
Fax:        +49 711 67976-11
Email:    hotline at transsolar.com<mailto:hotline at transsolar.com>
Web:      www.trnsys.de<http://www.trnsys.de/>



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Ilyas KHELIFA KERFAH via TRNSYS-users
Gesendet: 23 January 2017 17:02
An: TRNSYS users mailing list at OneBuilding.org
Betreff: [TRNSYS-users] TRNSYS. Exchange of air between the Zones of a building

Hello;
I have a housing of 5 zones (4 rooms and a corridor). The heating is installed in the corridor. How to make the air changes between the zones on trnsys 17 since the doors of the rooms are open. How to calculate the flow of air exchange between zones without using TRNFLOW. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170124/323a1c2b/attachment-0003.htm>