[TRNSYS-users] trnsys - help

[C K Lee via TRNSYS-users]

Dear Ilyas KHELIFA KERFAH.

One possible reason is that you don't have sufficient thermal 
capacitance in your system.  Try to solve the problem in this direction.

Best Regards
C. K. Lee
Research fellow
City University of Hong Kong


On 2017-01-19 01:41, Ilyas KHELIFA KERFAH via TRNSYS-users wrote:
> Hi,
> 
>  I have a gas heating system installed in the corridor of an
> apartment. As I have not found a good component for my case in the
> TRNSYS studio. I put only one calculator in the studio to calculate
> the power (= calorific value of gas * efficiency * flow). This flow is
> controlled with a regulator. But I see in my figures that the
> temperature increases in a single stroke. And its not logical because
> the temperature should increase gradually. Maybe you have an idea or a
> component of TRNSYS that I can use it so that the power does not
> increase quickly.
> 
> thank you.
> Cordially.
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org