[TRNSYS-users] solar processor tracking mode

[David BRADLEY via TRNSYS-users]

Adnan,

   I think you want to use fixed surfaces in Type16. Otherwise the 
assumption is that the building turns throughout the day to follow the 
sun in some way.

kind regards,

  David


On 01/16/2017 01:36, adnan rasheed via TRNSYS-users wrote:
> Hi everyone,
>
> i want to observe the effect of orientation of building on energy 
> demand, i am using Type56, with type9 with type 16 . my question is in 
> TYPE 16 solar radiation processor there are 4 tracking modes. which 
> one i need to use my building walls with slopes and surface azimuth. i 
> think tracking mode 3 will be okk? what i understand is mentioned below
>
> 1-fixed surface
> 2- where azimuth angle ignored
> 3- takes azimuth and slope also
> 4-both azimuth and slope ignored.
>
> am i right here???
>
> regards
> Adnan
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170117/2a3c90d0/attachment-0003.htm>