[TRNSYS-users] How to input user defined weather data to type 56 (multi zone building) by using type 99

adnan rasheed via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Jan 9 22:15:12 PST 2017


Hi nikkat,

Following these steps

1- Save your Excel file as text (Tab delimited) format.
2- Use Type9 in (Utility - Data reader - Generic data files) to use your
weather data.

don't forget to set parameters settings in TYPE9.

Regards
adnan

On Tue, Jan 10, 2017 at 3:05 PM, Niket Kumar via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Dear All,
>
> I want to input experimentally measured ambient temperature data (which is
> in the form of excel data files, having 1 min interval variation of ambient
> temperature for 1 month) as an input to type 56 (multizone building) so
> that I can see the actual temperature based response of test building.
>
> After going through documentations, it seems that we have to use type 99
> for above purpose, but I am not able to use it properly.
>
> Can you please let me know how can I do this?
>
> The format of data is as follows:
>
> Time(min)         Ambient Temperature(°C)
>
> 0                  20.00
> 1                  19.68
> 2                  19.74
> ...                      ....
> ...                      ....
>
>
>
>
> and so on.
>
>
> Thanking you,
>
> Niket Kumar
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170110/5a41f5c5/attachment-0003.htm>


More information about the TRNSYS-users mailing list