[TRNSYS-users] Debugging TRNSYS using Microsoft Visual Studio 2010

[Miguel Angel Reyes via TRNSYS-users]

To whom it may concern,

 

I’m finding some difficulties for TRNSYS code debugging using MVS2005. I was
able to build TRNSYS .dll using MVS compiler and launch TRNExe.exe through
compiler (Debug>Start without debugging) following the instructions from
TRNSYS manual 8 – Programmers guide (section 8.5.33.3).

 

Now I’m struggling trying to do line to line debugging using MVS compiler.
Since I’m planning to develop some new components, I would like firstly
being able to understand how calculations are performed by doing compiler
line by line debugging (using breakpoints and so on). However I’m facing
unexpected problem when going for debugging, basically error message says:

 

Debugging information for ‘TRNExe.exe’ cannot be found or does not match.
Binary was not built with debug information. However when trying start
without debugging from compiler, TRNExe.exe is launched and asking for .dck
file, so I cannot really understand what is going wrong.

 

I would really appreciate getting any hint on that,

 

Kind Regards

 

Miguel

 

---------------------------------------------------

Dr. Miguel Ángel Reyes Belmonte

IMDEA ENERGY Institute

Avda. Ramón de la Sagra, 3

Parque Tecnológico de Móstoles

E-28935 Móstoles, Madrid, Spain

Telf.: +34 91 737 1150

e-mail:  <mailto:miguelangel.reyes at imdea.org> miguelangel.reyes at imdea.org

web:  <http://www.energy.imdea.org> http://www.energy.imdea.org

 <https://es.linkedin.com/pub/miguel-angel-reyes/7b/347/b77>
https://es.linkedin.com/pub/miguel-angel-reyes/7b/347/b77

orcid.org/0000-0002-9666-2388

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170224/cef8201e/attachment-0003.htm>