[TRNSYS-users] R: high temperature of building

[Toni Calabrese via TRNSYS-users]

Hallo Ahmad,

  1.  did you check carefully the internal gains? (In case switch them off and try again)
  2.  did you check if the IDEAL Heating is implemented in the TRNBUILD File?

Toni Calabrese

Da: ahmad abbasian via TRNSYS-users<mailto:trnsys-users at lists.onebuilding.org>
Inviato: martedì 14 febbraio 2017 07:30
A: trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>
Oggetto: [TRNSYS-users] high temperature of building


Dear all

I have used the type 56b for building. I have  designed a HVAC system and I used the HVAC supply temperature for building ventilation temperature. and I have used the weather type for calculating the radiation on each wall as well as the ambient temperature of building. But my building temperature is higher than both ambient and supply temperature all over the time !  what is the problem?


Thank you


..............................................................................................
Ahmad abbasianzadeh
Solar energy Researcher
Harrisburg, Pensylvania



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170214/bce5d4cf/attachment-0003.htm>