[TRNSYS-users] R: (no subject)

Toni Calabrese via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Feb 13 10:09:58 PST 2017


Hi Riccardo,
which kind of heat pump are you using?
If you are using a AIRtoWATER Heat pump, you could define an active layer into the building and connect to the heat pump for example. In case you are using a AIRtoAIR Heat Pump, you could define a VENTILATION Type in TRNBUILD file and you could connect the output of the Heat pump to the input of the VENTILATION system. Did you understand?

Toni Calabrese

Da: Riccardo Nesa via TRNSYS-users<mailto:trnsys-users at lists.onebuilding.org>
Inviato: lunedì 13 febbraio 2017 19:03
A: trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>
Oggetto: [TRNSYS-users] (no subject)


Hi TRNSYS USERS,


i'd like to do a simulation with type 56 (where i designed my building) connected with a heat pump but with this type i can't connect the outlet flowrate of the heat pump directly with the building (i don't want to use the heating type manager in trnbuild).

anybody can help me?


i just want to study the performance of the heat pump and the temperature of the house (with the walls and materials that i decided for it in trnbuild).


thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170213/2241be78/attachment-0003.htm>


More information about the TRNSYS-users mailing list