[TRNSYS-users] how to control HVAC ?

[Jeff Thornton via TRNSYS-users]

Ahmad, 

There are literally hundreds of ways to control the temperature and
humidity in a space. I would suggest you do some reading to figure out a
common HVAC system given your climate and type of building - then you
can begin to replicate that system in TRNSYS. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 02/07/2017 12:08 pm, ahmad abbasian via TRNSYS-users wrote: 

> Hello 
> 
> I'm simulating a solar assisted coolig system for a building. The building cooling load is transient. so how the HVAC system should be controlled to cover the building load? I guess that the supply air temperature and humidity ratio should be constant ( a value in the comfort region ) and the air flow rate should be controlled using a variable speed fan to cover the cooling load. Is it right? any better idea? 
> 
> Also I don't know how the control system should be? should I use a thermostat? 
> 
> If any one can send me an example it will be very useful for me to learn 
> 
> Thank you 
> 
> .............................................................................................. 
> Ahmad abbasianzadeh 
> master of energy systems engineering 
> Solar energy Researcher 
> HARRISBURG, PENSYLVANIA 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170207/8776596f/attachment-0002.htm>