[TRNSYS-users] Type 541f from TESS

Sun Dec 17 00:53:45 PST 2017

Conseguiu resolver o problema, prof.? Tua versão é 17?

Em 15 de dez de 2017 11:54 AM, "Jorge Facao via TRNSYS-users" <
trnsys-users at lists.onebuilding.org> escreveu:

> Hello David,
> Many thanks for the reply.
> The TRNSYS version is <17.02.0005> and TESS libraries are
> <TESSSolarLibrary_v17.00_Release.dll>.
> Best regards,
>
> --
> Jorge Facão
>
> On 12-Dec-17 19:45, David BRADLEY wrote:
>
>> Jorge,
>>
>>  Which version of TRNSYS and which version of the TESS Libraries are
>> you using? The TRNSYS version can be determined by opening trnsys.ini
>> with a text editor. The TESS Libraries version can be determined by
>> looking at the filenames of the dlls that are located in the
>> ..\trnsysXX\UserLib\ReleaseDLLs\ directory.
>>
>> kind regards,
>>
>>  David
>>
>>
>>
>> On 12/11/2017 13:08, Jorge Facao via TRNSYS-users wrote:
>>
>>> Hello,
>>> I am trying to use the Type 541f for a ICS solar system.
>>> With a very simple deck I get the error below. The type parameters is
>>> limited to 17 in parameters tab.
>>>
>>> *** Fatal Error at time   :         0.000000
>>>     Generated by Unit     :     2
>>>     Generated by Type     :   541
>>>     TRNSYS Message    133 : The current Unit has specified more
>>> Parameters than are expected.
>>>     Reported information  : 19 PARAMETERS are required and 17
>>> PARAMETERS were specified.
>>>
>>> Any suggestion to solve this problem?
>>> Regards,
>>>
>>> --
>>> Jorge Facão
>>>
>>> Laboratório Nacional de Energia e Geologia (LNEG)
>>> Laboratório de Energia Solar
>>> Estrada do Paço do Lumiar, 22
>>> 1649-038 Lisboa - Portugal
>>> T: +351-210924600/1; Ext: 4379
>>> skype: jfacao
>>>
>>>
>>>
>>>
>>>
>>>
>>> UNIT 2 TYPE 541     Type541f
>>> *$UNIT_NAME Type541f
>>> *$MODEL .\Solar Library (TESS)\Integral Collector Storage Systems\Flat
>>> Plate ICS Collectors\Without HX\Theoretical IAM's\Type541f.tmf
>>> *$POSITION 629 331
>>> *$LAYER Main #
>>> *$# Versions of this ICS model are available for different HX
>>> configurations (vertical tube bank, horizontal tube
>>> *$# bank, and coiled tube HX) and for different incidence angle modifier
>>> accounting (single axis data file,
>>> *$# bi-axial data file, cover and absorber properties, etc.) for a small
>>> upgrade fee.  Contact TESS at (608) 274-
>>> *$# 2577 for more information.
>>> PARAMETERS 17
>>> 5        ! 1 # of Tank Nodes
>>> 1        ! 2 Noding scheme
>>> 0        ! 3 Heat Exchanger Geometry
>>> 1.19        ! 4 Tank Length
>>> 1.15        ! 5 Tank Width
>>> 0.062        ! 6 Tank Depth
>>> 1        ! 7 Tank Fluid
>>> 0        ! 8 Percent Volume of Tank Fluid
>>> 16        ! 9 Initial Tank Temperature
>>> 5.0        ! 10 Edge Loss Coefficient
>>> 5.0        ! 11 Bottom Loss Coefficient
>>> 0        ! 12 Additional Thermal Conductivity Mode
>>> 5        ! 13 IAM Mode
>>> 0.9        ! 14 Plate absorptance
>>> 2        ! 15 Number of covers
>>> 1.586        ! 16 Cover refractive index
>>> 0.05        ! 17 Extinction-thickness product
>>> INPUTS 28
>>> 0,0        ! [unconnected] Inlet Temperature
>>> 0,0        ! [unconnected] Inlet Flow Rate
>>> 0,0        ! [unconnected] Top Loss Temperature
>>> 0,0        ! [unconnected] Incident solar radiation
>>> 0,0        ! [unconnected] Horizontal diffuse radiation
>>> 0,0        ! [unconnected] Total horizontal radiation
>>> 0,0        ! [unconnected] Incident diffuse radiation
>>> 0,0        ! [unconnected] Incidence angle
>>> 0,0        ! [unconnected] Solar zenith angle
>>> 0,0        ! [unconnected] Solar azimuth angle
>>> 0,0        ! [unconnected] Top Surface Slope
>>> 0,0        ! [unconnected] Surface azimuth
>>> 0,0        ! [unconnected] Ground reflectance
>>> 0,0        ! [unconnected] Edge&Back Loss Temperature
>>> 0,0        ! [unconnected] Safety Loss Temperature
>>> 0,0        ! [unconnected] Inversion Mixing Flow Rate
>>> 0,0        ! [unconnected] Collector transmittance absorptance product
>>> 0,0        ! [unconnected] Top loss coefficient
>>> 0,0        ! [unconnected] Additional top losses
>>> 0,0        ! [unconnected] Safety loss coefficient-1
>>> 0,0        ! [unconnected] Safety loss coefficient-2
>>> 0,0        ! [unconnected] Safety loss coefficient-3
>>> 0,0        ! [unconnected] Safety loss coefficient-4
>>> 0,0        ! [unconnected] Safety loss coefficient-5
>>> 0,0        ! [unconnected] Additional internodal conductivity-1
>>> 0,0        ! [unconnected] Additional internodal conductivity-2
>>> 0,0        ! [unconnected] Additional internodal conductivity-3
>>> 0,0        ! [unconnected] Additional internodal conductivity-4
>>> *** INITIAL INPUT VALUES
>>> 20.0 0.0 20.0 0.0 0 0 0 0 0 0 45 0 0.2 10.0 10.0 0.0 0.7 15.0 0.0 0 0 0
>>> 0 0 0 0 0 0
>>> DERIVATIVES 5
>>> 16        ! 1 Initial Temperature of Node-1
>>> 16        ! 2 Initial Temperature of Node-2
>>> 16        ! 3 Initial Temperature of Node-3
>>> 16        ! 4 Initial Temperature of Node-4
>>> 16        ! 5 Initial Temperature of Node-5
>>> *-----------------------------------------------------------
>>> -------------------
>>>
>>>
>>> END
>>>
>>>
>>>
>>>
>>>
>>> - AVISO -
>>>
>>> Esta mensagem de correio eletrónico e quaisquer dos seus ficheiros
>>> anexos, caso existam, são confidenciais e destinados apenas à(s)
>>> pessoa(s) ou entidade(s) acima referida(s), podendo conter informação
>>> confidencial, privilegiada, a qual não deverá ser divulgada, copiada,
>>> gravada ou distribuída nos termos da lei vigente. Se não é o
>>> destinatário da mensagem, ou se ela lhe foi enviada por engano,
>>> agradecemos que não faça uso ou divulgação da mesma. Se recebeu esta
>>> mensagem por engano, por favor avise-nos de imediato, por correio
>>> eletrónico, para o endereço acima e apague este e-mail do seu sistema.
>>>
>>> Obrigado.
>>>
>>>
>>>
>>> - NOTICE -
>>>
>>> This e-mail transmission and eventual attached files are intended
>>> only for the use of the individual or entity named above and may
>>> contain information that is confidential, privileged and exempt from
>>> disclosure under applicable law. If you are not the intended
>>> recipient, or if you have received this transmission in error, please
>>> immediately notify us by e-mail at the above address
>>> <https://maps.google.com/?q=y+e-mail+at+the+above+address&entry=gmail&source=g>and
>>> delete this
>>> e-mail from your system.
>>>
>>> Thank you.
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at lists.onebuilding.org
>>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>>
>>
>>
> --
> Jorge Facão
>
> Laboratório Nacional de Energia e Geologia (LNEG)
> Laboratório de Energia Solar
> Estrada do Paço do Lumiar, 22
> 1649-038 Lisboa - Portugal
> T: +351-210924600/1; Ext: 4379
> skype: jfacao
>
> - AVISO -
>
> Esta mensagem de correio eletrónico e quaisquer dos seus ficheiros anexos,
> caso existam, são confidenciais e destinados apenas à(s) pessoa(s) ou
> entidade(s) acima referida(s), podendo conter informação confidencial,
> privilegiada, a qual não deverá ser divulgada, copiada, gravada ou
> distribuída nos termos da lei vigente. Se não é o destinatário da mensagem,
> ou se ela lhe foi enviada por engano, agradecemos que não faça uso ou
> divulgação da mesma. Se recebeu esta mensagem por engano, por favor
> avise-nos de imediato, por correio eletrónico, para o endereço acima e
> apague este e-mail do seu sistema.
>
> Obrigado.
>
>
>
> - NOTICE -
>
> This e-mail transmission and eventual attached files are intended only for
> the use of the individual or entity named above and may contain information
> that is confidential, privileged and exempt from disclosure under
> applicable law. If you are not the intended recipient, or if you have
> received this transmission in error, please immediately notify us by e-mail
> at the above address and delete this e-mail from your system.
>
> Thank you.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20171217/e76681a6/attachment.htm>