[TRNSYS-users] Type 541f from TESS
David BRADLEY
d.bradley at tess-inc.com
Tue Dec 12 11:45:51 PST 2017
Jorge,
Which version of TRNSYS and which version of the TESS Libraries are
you using? The TRNSYS version can be determined by opening trnsys.ini
with a text editor. The TESS Libraries version can be determined by
looking at the filenames of the dlls that are located in the
..\trnsysXX\UserLib\ReleaseDLLs\ directory.
kind regards,
David
On 12/11/2017 13:08, Jorge Facao via TRNSYS-users wrote:
> Hello,
> I am trying to use the Type 541f for a ICS solar system.
> With a very simple deck I get the error below. The type parameters is
> limited to 17 in parameters tab.
>
> *** Fatal Error at time : 0.000000
> Generated by Unit : 2
> Generated by Type : 541
> TRNSYS Message 133 : The current Unit has specified more
> Parameters than are expected.
> Reported information : 19 PARAMETERS are required and 17
> PARAMETERS were specified.
>
> Any suggestion to solve this problem?
> Regards,
>
> --
> Jorge Facão
>
> Laboratório Nacional de Energia e Geologia (LNEG)
> Laboratório de Energia Solar
> Estrada do Paço do Lumiar, 22
> 1649-038 Lisboa - Portugal
> T: +351-210924600/1; Ext: 4379
> skype: jfacao
>
>
>
>
>
>
> UNIT 2 TYPE 541 Type541f
> *$UNIT_NAME Type541f
> *$MODEL .\Solar Library (TESS)\Integral Collector Storage Systems\Flat
> Plate ICS Collectors\Without HX\Theoretical IAM's\Type541f.tmf
> *$POSITION 629 331
> *$LAYER Main #
> *$# Versions of this ICS model are available for different HX
> configurations (vertical tube bank, horizontal tube
> *$# bank, and coiled tube HX) and for different incidence angle modifier
> accounting (single axis data file,
> *$# bi-axial data file, cover and absorber properties, etc.) for a small
> upgrade fee. Contact TESS at (608) 274-
> *$# 2577 for more information.
> PARAMETERS 17
> 5 ! 1 # of Tank Nodes
> 1 ! 2 Noding scheme
> 0 ! 3 Heat Exchanger Geometry
> 1.19 ! 4 Tank Length
> 1.15 ! 5 Tank Width
> 0.062 ! 6 Tank Depth
> 1 ! 7 Tank Fluid
> 0 ! 8 Percent Volume of Tank Fluid
> 16 ! 9 Initial Tank Temperature
> 5.0 ! 10 Edge Loss Coefficient
> 5.0 ! 11 Bottom Loss Coefficient
> 0 ! 12 Additional Thermal Conductivity Mode
> 5 ! 13 IAM Mode
> 0.9 ! 14 Plate absorptance
> 2 ! 15 Number of covers
> 1.586 ! 16 Cover refractive index
> 0.05 ! 17 Extinction-thickness product
> INPUTS 28
> 0,0 ! [unconnected] Inlet Temperature
> 0,0 ! [unconnected] Inlet Flow Rate
> 0,0 ! [unconnected] Top Loss Temperature
> 0,0 ! [unconnected] Incident solar radiation
> 0,0 ! [unconnected] Horizontal diffuse radiation
> 0,0 ! [unconnected] Total horizontal radiation
> 0,0 ! [unconnected] Incident diffuse radiation
> 0,0 ! [unconnected] Incidence angle
> 0,0 ! [unconnected] Solar zenith angle
> 0,0 ! [unconnected] Solar azimuth angle
> 0,0 ! [unconnected] Top Surface Slope
> 0,0 ! [unconnected] Surface azimuth
> 0,0 ! [unconnected] Ground reflectance
> 0,0 ! [unconnected] Edge&Back Loss Temperature
> 0,0 ! [unconnected] Safety Loss Temperature
> 0,0 ! [unconnected] Inversion Mixing Flow Rate
> 0,0 ! [unconnected] Collector transmittance absorptance product
> 0,0 ! [unconnected] Top loss coefficient
> 0,0 ! [unconnected] Additional top losses
> 0,0 ! [unconnected] Safety loss coefficient-1
> 0,0 ! [unconnected] Safety loss coefficient-2
> 0,0 ! [unconnected] Safety loss coefficient-3
> 0,0 ! [unconnected] Safety loss coefficient-4
> 0,0 ! [unconnected] Safety loss coefficient-5
> 0,0 ! [unconnected] Additional internodal conductivity-1
> 0,0 ! [unconnected] Additional internodal conductivity-2
> 0,0 ! [unconnected] Additional internodal conductivity-3
> 0,0 ! [unconnected] Additional internodal conductivity-4
> *** INITIAL INPUT VALUES
> 20.0 0.0 20.0 0.0 0 0 0 0 0 0 45 0 0.2 10.0 10.0 0.0 0.7 15.0 0.0 0 0 0
> 0 0 0 0 0 0
> DERIVATIVES 5
> 16 ! 1 Initial Temperature of Node-1
> 16 ! 2 Initial Temperature of Node-2
> 16 ! 3 Initial Temperature of Node-3
> 16 ! 4 Initial Temperature of Node-4
> 16 ! 5 Initial Temperature of Node-5
> *------------------------------------------------------------------------------
>
>
> END
>
>
>
>
>
> - AVISO -
>
> Esta mensagem de correio eletrónico e quaisquer dos seus ficheiros
> anexos, caso existam, são confidenciais e destinados apenas à(s)
> pessoa(s) ou entidade(s) acima referida(s), podendo conter informação
> confidencial, privilegiada, a qual não deverá ser divulgada, copiada,
> gravada ou distribuída nos termos da lei vigente. Se não é o
> destinatário da mensagem, ou se ela lhe foi enviada por engano,
> agradecemos que não faça uso ou divulgação da mesma. Se recebeu esta
> mensagem por engano, por favor avise-nos de imediato, por correio
> eletrónico, para o endereço acima e apague este e-mail do seu sistema.
>
> Obrigado.
>
>
>
> - NOTICE -
>
> This e-mail transmission and eventual attached files are intended only
> for the use of the individual or entity named above and may contain
> information that is confidential, privileged and exempt from
> disclosure under applicable law. If you are not the intended
> recipient, or if you have received this transmission in error, please
> immediately notify us by e-mail at the above address and delete this
> e-mail from your system.
>
> Thank you.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
More information about the TRNSYS-users
mailing list