[TRNSYS-users] Horizontal ground loop

Jeff Thornton via TRNSYS-users trnsys-users at lists.onebuilding.org
Tue Aug 29 08:42:56 PDT 2017


Hessam,

Did you try reducing the timestep?  I'd also check the pump flow rates to make sure you aren't severely over-pumping the ground loop.  We use that combination of components routinely without trouble.  Let us know what you find.

Jeff / TESS

Sent from my iPhone

> On Aug 29, 2017, at 10:36 AM, Taherian, Hessam via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi,
>  
> I am modeling a GSHP type 919 with a horizontal ground loop type 997. No matter what I input as parameters I get errors regarding convergence of the model. Can someone help?
>  
> Thanks
> Hessam T
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170829/ed85b344/attachment-0003.htm>


More information about the TRNSYS-users mailing list