[TRNSYS-users] Canadian well / Puits canadien

[Brideau, Sébastien (NRCAN/RNCAN) via TRNSYS-users]

Hi,

Yes, you can model with Type 460 which you need to purchase from transsolar. It is quite difficult to use, but one of the best models out there I think. Type 460 is quite flexible, models the ground field in 3D, and can model interaction with a building.

Spend time with the manual. It took me quite a while before I was comfortable with it.

Sébastien Brideau

From: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] On Behalf Of Ismail OUHALLOU via TRNSYS-users
Sent: August 25, 2017 05:40
To: Jeremy Osborne via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Subject: [TRNSYS-users] Canadian well / Puits canadien

[Image removed by sender.]
Dear Trnsys experts,

I wonder if anyone would happen to have experience simulating the canadian well in Trnsys (in French Puits canadien) ? For those whom not familiar with it, the following article describes it: http://www.tectonica-online.com/products/2310/conditioning_air_ventilation_canadian/

Thanks in advance.

Best,
Ismail


--
************************************************
Ismail OUHALLOU
Green building & Sustainability consultant

Morocco

i.ouhallou at trusted-energy.com<mailto:i.ouhallou at trusted-energy.com>
issmail.ouhallou at gmail.com<mailto:issmail.ouhallou at gmail.com>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170825/698e0f2b/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: ~WRD000.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170825/698e0f2b/attachment-0003.jpg>