[TRNSYS-users] Open space using TRNSYS 3D plugin

[David BRADLEY via TRNSYS-users]

Eunice,

  Yes, you are correct about the way to deal with the non existent 
"ceiling" between the first and second floors of the atrium. Designate 
them as virtual surfaces and then in TRNBuild you'll add the two air 
nodes together (atrium_1 and atrium_2) into a single radiation zone.

  For the pyramid structure of the building, you'll need to draw a line 
in SketchUp/Trnsys3D that separates the horizontal surface at the top of 
the first floor into the portion that is a ceiling (and is adjacent to 
the second floor) and the part that is a roof (and does not share any 
adjacencies.)

kind regards,

  David



On 08/14/2017 04:22, Eunice Herrera via TRNSYS-users wrote:
>
> Dear Trnsys users,
>
> I am trying to model a two level building with an open space (atrium) 
> in the center using the Sketchup plugin TRNSYS3D. The level 1 has a 
> surface of 1600 m2, level two 1225m2 and the open space in the center 
> is 125m2. Both levels have a height of 4m. The building has a 
> pyramidal structure.
>
> For my purpose, first I have drawn two rectangular prisms (each one in 
> one zone) sharing ceiling and floor as adjacent surfaces. Now I need 
> to include the open space. My idea is to draw a 2D rectangle surface 
> in both ceiling (level 1) and floor (level 2 ) and classify these 2D 
> rectangles as virtual surfaces with adjacencies. As a result, I will 
> have two zones, each one including a rectangular prism with a virtual 
> surface in the center.In this the correct way to do it?
>
> Another question, The ceiling (or roof) in level 1 must be classified 
> as ceiling or roof (a part of its surface is exposed to outdoors and 
> not sharing any adjacencies with the floor in level 2 due to the 
> pyramidal structure)?
>
> I really appreciate your help.
>
> Eunice Herrera
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170815/a0d5ef31/attachment-0002.htm>