[TRNSYS-users] Natural ventilation

hotline via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Aug 7 22:51:21 PDT 2017


Dear Adnan,

you could use the opening type “Test Data” in TRNFlow if you have some correlations between pressure difference and volume flow for the insects mesh.
See also chapter 3.2.6 of the TRNFlow manual.

Best
Jakob

__________________________________________________________________________________________________

Jakob Merk M.Sc.

Transsolar Energietechnik GmbH
Curiestraße 2
70563 Stuttgart
http://www.transsolar.com<http://www.transsolar.com/>
Transsolar: KlimaEngineering- Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäuden
Stuttgart – München – New York – Paris
Geschäftsführer :Diplom-Ingenieur Matthias Schuler, Diplom-Ingenieur Thomas Auer, Diplom-Physiker Stefan Holst, Diplom-Betriebswirt Dieter Schnelle
Eingetragen beim Amtsgericht Stuttgart HRB 23347,
Steuernummer: 99073/00911,USt-IdNr.: DE 152272639



Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von adnan rasheed via TRNSYS-users
Gesendet: 08 August 2017 06:38
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Betreff: [TRNSYS-users] Natural ventilation

Hello everyone,

Actually i want to simulate natural ventilation through opening window by using TRNFlow. my problem is when window is fully opened there is mash on window (perforated sheet to avoid insects) this will sourly effect wind to come and out. and which will cause ventilation effect less. how i can simulate this kind of mash sheet anyone have idea about that.



Thanks in advance

Adnan Rasheed
PhD student
South Korea
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170808/c60994ef/attachment-0003.htm>


More information about the TRNSYS-users mailing list