[TRNSYS-users] calcullation of building load

[David BRADLEY via TRNSYS-users]

It sounds as though there is something not quite right about the 
simulation. I would recommend that you send your simulation files to 
your distributor for assistance. If you aren't sure who to contact, 
please send me an email directly and I can assist.

kind regards.

  David



On 04/26/2017 05:05, 吕伟华 via TRNSYS-users wrote:
> Hello, I am working on my project using TRNSYS to calculate the 
> cooling load and heating load of a typical office room. I use type56 
> to describe the building parameter. But I don't know how to set the 
> initial temperature of the room. when I set the initial temperature 18 
> centigrade, the heating load is very small, when I decrease the 
> initial temperature to 10 centigrade, the heating load is become 
> larger, and the accumulated heating load difference is very obvious 
> when the initial temperature is changed. I don't konw why the heating 
> load is affected by the initial room temperature strongly, have you 
> get into this trouble in your projects? can you please help me by 
> giving me some options?
> Thangk you very much indeed.
>
> Best regards.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170426/ceb55967/attachment-0003.htm>