[TRNSYS-users] capacitance thermique

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Mon Apr 17 14:21:35 PDT 2017


Ilyas,

  If you are talking about Type56 then the thermal capacitance of the 
walls are already taken into account in the wall model by your 
definition of the wall materials. The thermal capacitance that you're 
being asked to specify is the thermal capacitance of everything else in 
the zone (furnishings, air, contents). A typical value would be about 
volume*1.2*5 (ie. five times the thermal capacitance of the air 
contained in the zone).

kind regards,

  David



On 04/15/2017 11:05, Ilyas KHELIFA KERFAH via TRNSYS-users wrote:
> Hello
> The thermal capacity for a dwelling. In reinforced concrete (heavy): 
> capacitance = volume * 150. Is that logical?
>
>
> Thanks.
>
>
> Ilyas
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170417/3347f24b/attachment-0003.htm>


More information about the TRNSYS-users mailing list