[TRNSYS-users] Heat exchangers network modelling problem

[Miguel Angel Reyes via TRNSYS-users]

Hi all,

 

I’m modelling a system using a network of heat exchangers for heat recovery
purposes (see attached picture). 

 

Heat exchanger calculations seems to be repeated many times for a given
time-step and their temperatures re-calculated within the same time-step
while other components on that model are not updated until the next time
step (as it should be). Problem observed at the exchanger is leading to
wrong temperature calculations. From our understanding types should be only
be called once every time-step, furthermore heat exchangers network should
be re-calculated taking the temperature from connecting models. Is there any
option or any idea to bring light on this problem?

 

Kinds regards

 

---------------------------------------------------

Dr. Miguel Ángel Reyes Belmonte

IMDEA ENERGY Institute

Avda. Ramón de la Sagra, 3

Parque Tecnológico de Móstoles

E-28935 Móstoles, Madrid, Spain

Telf.: +34 91 737 1150

e-mail:  <mailto:miguelangel.reyes at imdea.org> miguelangel.reyes at imdea.org

web:  <http://www.energy.imdea.org> http://www.energy.imdea.org

 <https://es.linkedin.com/pub/miguel-angel-reyes/7b/347/b77>
https://es.linkedin.com/pub/miguel-angel-reyes/7b/347/b77

orcid.org/0000-0002-9666-2388

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170403/6f9379fa/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Intercambiadores.png
Type: image/png
Size: 14233 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170403/6f9379fa/attachment-0003.png>