[TRNSYS-users] how can I simulate a fan and pad cooling system for greenhouse?

[David BRADLEY via TRNSYS-users]

Amirezza,

   There are components in the TESS HVAC library that will allow you to 
model something close to the wet pad. Have a look at the swamp / direct 
evaporative cooler for a starting place.

kind regards,

  David



On 04/06/2017 13:37, Amirreza Heidary via TRNSYS-users wrote:
> fan and pad is a common method of cooling in a greenhouse. In this 
> method, one of the walls is replaced with a wet pad, and there are 
> fans on the other side to intake the air. How is it possible to be 
> modeled in trnsys? I have TESS components if they are needed
> Inline image 1
>
> **
>
>
>
>
>
>
>
> <https://mailtrack.io/> Sent with Mailtrack 
> <https://mailtrack.io/install?source=signature&lang=en&referral=amirrezaheidarysbu@gmail.com&idSignature=22> 
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170411/b3e7216b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 564436 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170411/b3e7216b/attachment-0001.png>