[TRNSYS-users] Type 9

[David BRADLEY via TRNSYS-users]

Adnan,

   Type9 can do what you are asking it to do. However, you need to 
select the correct data reading mode and the correct simulation start 
and stop times. Please read the Type9 description in the 
04-MathematicalReference manual so as to understand how the Type9 mode 
can be used to set whether lines of the data file should be skipped or 
if they start at the beginning of your simulated period.

kind regards,

  David



On 09/29/2016 02:38, adnan rasheed via TRNSYS-users wrote:
> Hi all,
>
> I have 2 months (Jan and Feb) of feild weather data. i want to observe 
> the energy requirement for 20
> days starting from 10 Jan to 10 Feb. i start simulation from 216 hrs 
> and also check starting with 0
>
> hrs TRNSYS give me the same results as in the weather file huge 
> difference between temperatures. I did not understand how
>
> TRNSYS TYPE 9 read weather data. I put data for two months only, 
> but TRNSYS is also
>
> running simulations for a whole year.
>
>
> Regards
> Adnan
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160929/3e54ab92/attachment-0003.htm>