[TRNSYS-users] Detailed calculations of radiation and comfort, and set geoposition.

[via TRNSYS-users]

While setting the number of warnings before an error may allow the
simulation to proceed further, it does not "fix" the problem. If the
Type 56 model is not converging you need to figure out why. I would
review all of my inputs and gains to the zone and see if something has
been entered incorrectly. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
office: 608-274-2577
cell: 608-225-5250

On 2016-09-25 15:59, Hsein Moussawi via TRNSYS-users wrote: 

> Hi, 
> 
> Just press on the control cards icon in the left panel; 
> 
> Search for the box named 'before error' and set its value to a large number. 
> 
> This should solve your problem. 
> 
> Regards. 
> 
> ------------------------------------------------------------------ 
> Houssein Al Moussawi
> PhD Joint Student 
> University of Caen Normandy & Lebanese University 
> 
> -------------------------
> 
> FROM: Katarzyna P -PP via TRNSYS-users <trnsys-users at lists.onebuilding.org>
> SENT: Sunday, September 25, 2016 3:41 PM
> TO: TRNSYS
> SUBJECT: [TRNSYS-users] Detailed calculations of radiation and comfort, and set geoposition. 
> 
> I want to prepare a simulation with detailed calculations of radiation and comfort, and set geoposition. I get this error: 
> 
> *** Fatal Error at time : 134.000000 
> Generated by Unit : Not applicable or not available 
> Generated by Type : Not applicable or not available 
> TRNSYS Message 450 : The maximum number of warnings allowed per simulation has been exceeded. Please fix these warnings or increase the limit on the number of warnings allowed per simulation (LIMITS command) 
> Reported information : Not available 
> 
> Example of warrnings: 
> 
> *** Warning at time : 7.000000 
> Generated by Unit : 56 
> Generated by Type : 56 
> Message : Convergence of the internal iteration of TYPE 56 not attained within 100max. number of internal iterations! 
> 
> What should I change? 
> 
> Sincerally 
> 
> Katarzyna Pałaszyńska 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160926/2154fcc2/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 299283 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160926/2154fcc2/attachment-0003.png>