[TRNSYS-users] weather file coupling with surfaces

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Fri Sep 2 12:08:12 PDT 2016


Rodrigo,

  No, you don't. Type56 automatically gets that information from the 
weather file that is providing the ambient temperature and RH to the 
building model. You can still connect those items manually if you want 
to. In order to do so, you need to go into TRNBuild and change the 
"calculation mode" setting for any orientation that you want to set up 
manually.

kind regards,

  David



On 08/30/2016 15:32, Rodrigo Mora via TRNSYS-users wrote:
>
> Hello,
>
> When the 3D geometry is imported from Sketchup or CONTAM do I still 
> need to manually couple each external surface with the corresponding 
> total and beam solar radiation and the incidence angle from the 
> weather file?
>
> Thanks,
>
> */Rodrigo/*
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160902/a51982db/attachment-0002.htm>


More information about the TRNSYS-users mailing list