[TRNSYS-users] Deleting Email from Newsletter

David BRADLEY via TRNSYS-users trnsys-users at lists.onebuilding.org
Thu Oct 20 07:02:08 PDT 2016


Jonathan-Leon,

   You can visit: 
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org 
and find instructions for unsubscribing from the list.

kind regards,

  David



On 10/20/2016 03:23, Jonathan-Leon Finkbeiner via TRNSYS-users wrote:
> Dear TRNSYS-Team,
>
> is it possible to delete my email address from the email-list. I am 
> not interested in getting the mails anymore.
>
> Thank you an pleas mail back
> Jonathan-Leon Finkbeiner
>
>> Am 19.10.2016 um 18:13 schrieb via TRNSYS-users 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>:
>>
>> Send TRNSYS-users mailing list submissions to
>> trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>> or, via email, send a message with subject or body 'help' to
>> trnsys-users-request at lists.onebuilding.org 
>> <mailto:trnsys-users-request at lists.onebuilding.org>
>>
>> You can reach the person managing the list at
>> trnsys-users-owner at lists.onebuilding.org 
>> <mailto:trnsys-users-owner at lists.onebuilding.org>
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>> Today's Topics:
>>
>>   1. Re: Reading a profile of temperatures
>>      (Florian Galler via TRNSYS-users)
>>   2. Training: TRNSYS E-Learning Series or TRNSYS E-Learning
>>      Series Self-Paced (Magdalena Filipiak via TRNSYS-users)
>>   3. adding thermal capacity (Federico Bava via TRNSYS-users)
>>   4. Re: adding thermal capacity (David BRADLEY via TRNSYS-users)
>>
>> *Von:*Florian Galler via TRNSYS-users 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Betreff:**Aw: [TRNSYS-users] Reading a profile of temperatures*
>> *Datum:*18. Oktober 2016 um 20:14:15 MESZ
>> *An:*massimt31 at gmail.com <mailto:massimt31 at gmail.com>, "TRNSYS users 
>> mailing list atOneBuilding.org <http://onebuilding.org/>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Antwort an:*Florian Galler <ee14b011 at technikum-wien.at 
>> <mailto:ee14b011 at technikum-wien.at>>, "TRNSYS users mailing list 
>> atOneBuilding.org <http://onebuilding.org/>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>>
>>
>> Hey massimt31?
>>
>> Do you have the temperatur profile in simulation studio? I think the 
>> best way would be to input "cooling power" that is available. If you 
>> can transfer you temperatures into available "cooling power" follow 
>> these steps.
>>
>> You have to define a new Input in TRNBUILD (so you can give the 
>> cooling Input to the building). Open the "cooling type manager" an 
>> define a new cooling type. Within that you click on the "limited" 
>> button (section cooling power), the arrow and choose "Input". There 
>> you can choose your TRNBUILD Input you defined in the beginning.
>>
>> The QCool Output function gives you the cooling demand, that is 
>> needed to reach the set temperature.
>>
>> Kind regards
>> Florian
>> Am 18.10.2016 um 18:01 schrieb via TRNSYS-users:
>>> Hello everyone,
>>> I would like to know if it is possible to give to a cooling system 
>>> (in TRNBUILD) a profile of temperature.
>>> I would like that the cooling system could read this temperatures 
>>> and then work to reach them with unlimited cooling power.
>>> Thanks in advance
>>> King regards
>>> Inviato daPosta <https://go.microsoft.com/fwlink/?LinkId=550986>per 
>>> Windows 10
>>> *Da:*via TRNSYS-users <mailto:trnsys-users at lists.onebuilding.org>
>>> *Inviato:*martedì 18 ottobre 2016 10:22
>>> *A:*TRNSYS-users at lists.onebuilding.org 
>>> <mailto:TRNSYS-users at lists.onebuilding.org>
>>> *Oggetto:*[TRNSYS-users] (no subject)
>>> Hello everyone,
>>> I would like to know if it is possible to give to a cooling system 
>>> (in TRNBUILD) a profile of temperature.
>>> I would like that the cooling system could read this temperatures to 
>>> reach them with unlimited cooling power.
>>> Thanks in advance
>>> King regards
>>> Inviato daPosta <https://go.microsoft.com/fwlink/?LinkId=550986>per 
>>> Windows 10
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at lists.onebuilding.org
>>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>>
>>
>>
>> *Von:*Magdalena Filipiak via TRNSYS-users 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Betreff:**[TRNSYS-users] Training: TRNSYS E-Learning Series or 
>> TRNSYS E-Learning Series Self-Paced*
>> *Datum:*19. Oktober 2016 um 10:18:56 MESZ
>> *An:*trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>
>> *Antwort an:*Magdalena Filipiak <magdalena.filipiak at put.poznan.pl 
>> <mailto:magdalena.filipiak at put.poznan.pl>>, "TRNSYS users mailing 
>> list atOneBuilding.org <http://onebuilding.org/>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>>
>>
>> Good morning,
>>
>> I am interested TRNSYS E-Learning Series or TRNSYS E-Learning Series 
>> Self-Paced.
>> I would like to know when the will strat course or if I can begin the 
>> cours in convenient for me time.
>>
>> Best regards,
>> Magdalena Filipiak
>>
>> e-mailmagdalena.filipiak at put.poznan.pl 
>> <mailto:magdalena.filipiak at put.poznan.pl>
>>
>>
>>
>> *Von:*Federico Bava via TRNSYS-users 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Betreff:**[TRNSYS-users] adding thermal capacity*
>> *Datum:*19. Oktober 2016 um 10:02:35 MESZ
>> *An:*"trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Antwort an:*Federico Bava <febav at byg.dtu.dk 
>> <mailto:febav at byg.dtu.dk>>, "TRNSYS users mailing list 
>> atOneBuilding.org <http://onebuilding.org/>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>>
>>
>> Hello everyone,
>> I would like to add some thermal capacity to a heat exchanger (type5) 
>> to take into account the metal mass of a flat plate heat exchanger. 
>> Is there any one with some suggestions/ideas on how this can be done 
>> with some workaround?
>> Thanks in advance and best regards,
>> Federico
>>
>>
>>
>> *Von:*David BRADLEY via TRNSYS-users 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Betreff:**Aw: [TRNSYS-users] adding thermal capacity*
>> *Datum:*19. Oktober 2016 um 18:13:44 MESZ
>> *An:*Federico Bava <febav at byg.dtu.dk <mailto:febav at byg.dtu.dk>>, 
>> "TRNSYS users mailing list atOneBuilding.org 
>> <http://onebuilding.org/>" <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>> *Antwort an:*David BRADLEY <d.bradley at tess-inc.com 
>> <mailto:d.bradley at tess-inc.com>>, "TRNSYS users mailing list 
>> atOneBuilding.org <http://onebuilding.org/>" 
>> <trnsys-users at lists.onebuilding.org 
>> <mailto:trnsys-users at lists.onebuilding.org>>
>>
>>
>> Federico,
>>
>>  You'd need to modify the Fortran code and make a new Type, then 
>> compile it and make a dll. The Type5 heat exchanger model is quasi 
>> steady state and you'd need to turn the solution into that of a first 
>> order differential equation in order to account for the mass of the 
>> exchanger.
>>
>> kind regard,s
>>
>>  David
>>
>>
>>
>> On 10/19/2016 03:02, Federico Bava via TRNSYS-users wrote:
>>> Hello everyone,
>>> I would like to add some thermal capacity to a heat exchanger 
>>> (type5) to take into account the metal mass of a flat plate heat 
>>> exchanger. Is there any one with some suggestions/ideas on how this 
>>> can be done with some workaround?
>>> Thanks in advance and best regards,
>>> Federico
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at lists.onebuilding.org
>>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>> -- 
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI  53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475
>> d.bradley at tess-inc.com
>>
>> http://www.tess-inc.com
>> http://www.trnsys.com
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org 
>> <mailto:TRNSYS-users at lists.onebuilding.org>
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161020/3aed4599/attachment-0003.htm>


More information about the TRNSYS-users mailing list