[TRNSYS-users] adding thermal capacity

Joao Cardoso via TRNSYS-users trnsys-users at lists.onebuilding.org
Wed Oct 19 09:36:56 PDT 2016


Dear Federico,
The STEC library provides a thermal capacity model (type 306 - Lumped mass to simulate thermal capacity of components). Perhaps this could be of use for you. You can have more information at http://sel.me.wisc.edu/trnsys/trnlib/stec/stec.htm
Best regards,

João Pereira Cardoso
Unidade de Energia Solar


        [cid:image005.jpg at 01D22A2F.62826D30]




Laboratório Nacional de Energia e Geologia, I.P.
Estrada do Paço do Lumiar, 22
1649-038 Lisboa
Tel: +351 210 924 743
Fax: + 351 217 166 966
joao.cardoso at lneg.pt<mailto:joao.cardoso at lneg.pt>                   www.lneg.pt<http://www.lneg.pt/>

[cid:image003.png at 01D22A2F.4CE807F0]  [cid:image004.png at 01D22A2F.4CE807F0]

From: David BRADLEY via TRNSYS-users [mailto:trnsys-users at lists.onebuilding.org]
Sent: quarta-feira, 19 de Outubro de 2016 17:14
To: Federico Bava; TRNSYS users mailing list at OneBuilding.org
Subject: Re: [TRNSYS-users] adding thermal capacity


Federico,

 You'd need to modify the Fortran code and make a new Type, then compile it and make a dll. The Type5 heat exchanger model is quasi steady state and you'd need to turn the solution into that of a first order differential equation in order to account for the mass of the exchanger.

kind regard,s

 David



On 10/19/2016 03:02, Federico Bava via TRNSYS-users wrote:
Hello everyone,

I would like to add some thermal capacity to a heat exchanger (type5) to take into account the metal mass of a flat plate heat exchanger. Is there any one with some suggestions/ideas on how this can be done with some workaround?

Thanks in advance and best regards,

Federico





_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



--

***************************

David BRADLEY

Principal

Thermal Energy Systems Specialists, LLC

22 North Carroll Street - suite 370

Madison, WI  53703 USA



P:+1.608.274.2577

F:+1.608.278.1475

d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>



http://www.tess-inc.com

http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161019/63832cc9/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 70903 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161019/63832cc9/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 3359 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161019/63832cc9/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 7053 bytes
Desc: image004.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161019/63832cc9/attachment-0011.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 2044 bytes
Desc: image005.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161019/63832cc9/attachment-0003.jpg>


More information about the TRNSYS-users mailing list