[TRNSYS-users] Modify/Customise Type 105a

[David BRADLEY via TRNSYS-users]

Asma

   I do not think that you need to modify Type105. If you set the first 
two parameters to 0 then you will effectively prevent any diesel 
generators from operating.

kind regards,

  David



On 11/27/2016 06:04, Asma Mohamad Aris via TRNSYS-users wrote:
> Hi there TRNSYS users, Recently, I would like to model a power supply 
> system that comprises of photovoltaics, battery, electrolyser, PEM 
> fuel cells using TRNSYS. However as the system is an off-grid based 
> system, I need to modify the Master Control component (type 105a) used 
> in TRNSYS to suit the nature of my case study (i.e. not relying on 
> diesel generator at all). With that, can someone enlighten me on how 
> to do so? I read previously that I need to this in Visual C++ abd 
> create DLL file. Is this true? If yes, can someone share a 
> tutorial/step-by-step guide to do so. Also, will it be possible for 
> someone with no programming background to modify the TRNSYS 
> components? Thank you in advance. Cheers, Asma
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161128/93e6aabd/attachment-0002.htm>