[TRNSYS-users] problem rendering with trnsys3d

[francesca lorusso via TRNSYS-users]

Dear all,
i have a problem with importing the trnsys' results on trnsys3d: the
printer show each surface's temperatures but in trnsys3d they don't appear.
My results on printer:
[image: Immagine incorporata 1]
my no-results on trnsys3d:
[image: Immagine incorporata 2]
Looking at this image, i notice that in "rendering settings", in " outside
variable name" is empty, what do you think is the problem?
Thank you for your attention,
Best regards
-- 
*FRANCESCA LORUSSO*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161117/c84013f8/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 370277 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161117/c84013f8/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 372748 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161117/c84013f8/attachment-0007.png>