[TRNSYS-users] Type 12

Wed Nov 16 08:52:30 PST 2016

It depends a bit on what kind of water cooled system you have (for 
example, is it a fan coil or a radiant floor). If it is a system that 
removes energy from the zone by means of an air (ventilation) stream 
then I would recommend using Type88. If you have a radiant system then 
Type56 is probably the best alternative.

kind regards,

  David

On 11/16/2016 09:33, bridjesh gautam via TRNSYS-users wrote:
> Dear Trnsys users,
>
> I am looking to model a server with cooling demand. Type 12-c with 
> internal gain would be ideal but it seems it do not take input in the 
> form of inlet mass flow and temperature for cold fluid like it does 
> for heating.
> I need to model water cooled system , what other alternatives do I have ?
>
>
> Your's
> Khem Raj Gautam
> Aarhus University
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161116/43e3fd92/attachment-0003.htm>