[TRNSYS-users] Basement modeling - Sous-sol in French!

[Issmail OUHALLOU via TRNSYS-users]

​Dear Trnsys-experts,

Would anyone happen to have an experience on advanced building modeling
with basements included? I am trying to model a building in TRNSYS 17 using
type 56. My building includes three basements as shown in figure below.


​I am wondering if what I have done puts me in the right path, to know: I
used Type 77 to model a simple ground temperature, then the output (soil
temperature at Node) has been connected to TBOUNDARY. In fact, I have set
three Nodes in type 77 (one node for each basement) and the walls's
boundary conditions of the basements are = 1*TBOUNDARY.

Thanks in advance

Regards,
Ismail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161104/c37e2e78/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 317.4.1f-Fluchtwege-UG7.6.gif
Type: image/gif
Size: 4304 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161104/c37e2e78/attachment-0003.gif>