[TRNSYS-users] The TRNSYS processor has reported an illegal variable name in an EQUATIONS or CONSTANTS card.

[leen peeters via TRNSYS-users]

Erfan,

can you copy the equations in that equation writer?
So we can have a look at it!

Leen

On 6 November 2016 at 08:57, Erfan m via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> hi to all transys users,
>
> I'm modeling a solar cooling system in the studio, i have cooling loads of
> the building that is estimated using Design builder software. i put the
> hourly cooling load in a exel, .xls file to import in type9 component of
> trnsys and use an equation to gain the temperature data in connect it to a
> fan-coil unit. problem is after running the model, there an error that says
> equations or constants must not begin with END,INC, EQU, CON. but there is
> not any of these names in my project equation component.
> please help me how to get rid of it.
>
> Erfan Malekian,
> M.Eng. in Energy Conversion,
> Mechanical Engineering Department,
> Azad university of Semnan, Semnan, Iran
> malekian.e at gmail.com
>
>
> *** Fatal Error at time   :         0.000000
>     Generated by Unit     : Not applicable or not available
>     Generated by Type     : Not applicable or not available
>     TRNSYS Message     11 : The TRNSYS processor has reported an illegal
> variable name in an EQUATIONS or CONSTANTS card.  Equations or constants
> must not begin with END, INC, EQU or CON as these are protected codes
> required when reading the TRNSYS input file.  The offending variable name
> is listed below.
>     Reported information  : INCIDENT
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20161106/c7098260/attachment-0001.htm>